ETM 1, incl. nickel-plated brass thermowell

Screw-in temperature transducer, with active output

Application
The ETM 1 is a screw-in temperature transducer in IP65 housing with quickrelease screws. For recording the temperature of liquid and gaseous media. They are used in pipelines, in heating technology, in storage tanks, district heating compact stations, hot and cold water systems, oil and lubrication circuit systems, in machine, device and plant construction as well as in the entire industrial sector. For aggressive media, use the stainless steel thermowells 1.4571.

Technical Data

Power supply:0-10V 24V AC/DC , 4...20 mA 24V DC ±20 %
Sensor:PT1000 DIN EN 60751 Class A
Measuring range:Adjustable with Dip switch, see table
Ambient temperature:Transducer -30 ... +60°C
Circuit type:2-wire connection
Process connection:Screw-in thread with G 1/2“
Thermowell:Nickel-plated brass, G1/2", SW 22, Ø = 8mm
Protective pipe:Stainless steel, 1.4571, V4A, Ø = 6mm
Connection head:made of plastic, polyamide, 30%
glass-ball reinforced, with quick-release
screws, colour pure white (similar to RAL 9010)
Dimensions:70 x 62 x 37 mm
Electrical connection:0.14 - 1.5 mm² via screw terminals
Cable gland:M16, with tension relief
Insulation resistance:≥ 100 MΩ, at 20 °C (500V DC)
Humidity:< 95 % rH, non-condensing air
Protection class:III (according to EN 60 730)
Protection type:IP 65 (according to IEC 529)
Accuracy:see technical data sheet of transducer
Standards:CE conformity, electromagnetic compatibility
according to EN 61 326 + A1 + A2,
EMV Directive 89/336/EWG

ALTM 2 Display