ET060
Temperature controller, single-stage, damp area
Application
The ET060 is a temperature controller for controlling and monitoring in cold rooms, greenhouses, industrial halls as well as in damp areas and exterior areas.
Technical Data
| Switching capacity: | 250V AC, 16A resistive load, 6A inductive (contact) load |
| Contact: | dust-encapsulated microswitch as single-pin, potential-free changeover switch, (changeover contact) |
| Housing: | Material ABS (acrylonitrile butadiene styrene)
glass fibre reinforced,
bottom part: Colour grey (similar to RAL 7038) Top part: Colour white (similar to RAL 9016), M 20 x 1,5 |
| Dimensions: | 108 x 70 x 72mm |
| Housing temperature: | -10°...+65°C |
| Ambient temperature: | -20°...+70°C |
| Capillary: | Stainless steel, 1.4303, V2A |
| Electrical connection: | 0,14 - 2,5 mm² via screw terminals |
| Protection class: | I (according to EN 60 730) |
| Protection type:: | IP 54 (according to IEC 529) |
| Standards: | CE conformity, EMV Directive2004/108/CE Low Voltage Directive 2006/95/CE |
| Function: | |
| Heating: | The setpoint value (scale value) that has been set corresponds to the deactivation value of the heating system. The activation value is lower by the switching difference. Contacts 2 and 3 open at temperature increase to the set value. |
| Cooling: | The setpoint value (scale value) that has been set corresponds to the activation value of the cooling system. The deactivation value is less by the switching difference. Contacts 1 and 2 close at temperature rise to the set value. |
ET060
