GATEWAY BACnet/IP Slave NEW
BACnet/IP Slave / Modbus® RTU Master
Application
The configurable BACnet/IP Slave gateway enables
communication between a BACnet/IP Master and Modbus RTU Slaves.
The registers of all connected Modbus RTU Masters are made available to the BACnet/IP Master as BACnet objects.
The gateway configuration can be transferred very quickly and easily via software using the Ethernet port.
The labeled screw terminals ensure quick and secure installation and easy wiring of the device.
The 1TE wide DIN rail housing requires very little space.
Technical Data
| Power supply voltage: | 9-26V DC |
| Power consumption: | typically 0.5W |
| Ethernet Interface: | Number of connections 1 |
| Speed: | 10/100 Mbps, Auto MDI/MDIX, Auto negotiation |
| Plug-In connector: | 8-pin RJ45 |
| Insulation protection: | 1,5 KV |
| Interfaces: | 1x Ethernet port (RJ45 socket) |
| Serial Interface: | |
| Number of connections: | 1 |
| Standard serial: | RS485 |
| Connection: | Screw terminal block |
| ESD protection: | 15 KV for all signals |
| Serial communication paramters | |
| Datat Bits: | 7.8 |
| Stop Bits: | 1, 1.5, 2 |
| Parity: | None, Even, Odd |
| Baud rate: | 300 bps to 115,2 Kbps |
| Serial signals: | RS485: Data+ , Data- , GND |
| Operating temperature: | 0...+50 °C |
| Storage temperature: | 0...+50°C |
| Housing: | Plastic |
| LED-Display: | TX and RX |
| Dimensions WxHxD: | 17.5 x 90 x 55mm |
| Installation: | TS35 profile rail |
| Humidity: | <95% rH non-condensing air |
| Protection type: | IP20 |
| Standards: | CE conformity |
| EMC: | according to EN61326 |
Gateway BACnet/IP Slave /
Modbus® RTU Master
