SW
Flow monitor, electronic, single-stage
Application
The SW is a flow monitor (based on thermodynamics without moving parts) for liquid and gaseous media in pipelines as a flow monitor or lowwater protection, like pumps in cooling circuits, refrigerating machines, evaporators, compressors and heat exchangers.
Technical Data
| Power supply: | see table |
| Voltage tolerance: | ±5% |
| Signal display voltage: | Green LED |
| Power consumption: | max. 4,5 VA |
| Unit ambient temperature: | -20...+60°C |
| Flow signal output: | 1 changeover contact |
| Current / contact rating: | 250V AC, 6A, 1,5kVA |
| Switching function for flow: | Relay energises |
| Flow signal: | Yellow LED |
| Media temperature: | -25...+80°C |
| Permitted media glycol content: | max. 30% |
| Temperature gradient: | 15k/min |
| Switching point: | switchable via potentiometer |
| Air measuring range: | 0,5 - 20 m/s |
| Water measuring range: | 0,03 - 3 m/s |
| Sensor: | built-in |
| Immersion depth: | see table |
| Process connection: | G 1/2“ |
| Sensor material: | V2A stainless steel 1.4303 or 1.4305 |
| Pressure resistance: | 20 bar |
| Housing protection type: | IP65 |
| Protection type sensor: | IP67 |
| Connection: | 5 terminals, 2,5mm² |
| Housing dimensions: | LxBxH:56 x 84 x 82 mm |
| Standards: | CE conformity |
